Pro-Ject
Amp Box S3 L
Pro-Ject launches Amp Box S3 L stereo power amplifier
The Amp Box S3 L joins the 2022 Amp Box S3 in Pro-Ject’s range, with more power and a larger enclosure. Pro-Ject pairs the new model with its Pre Box S3 universal preamplifier.
Georg S. Kuklick
•
Pro-Ject has added a larger, more powerful model to its Amp Box range. The Amp Box S3 L digital stereo power amplifier is rated at 140 W per channel into 4 ohms or 80 W per channel into 8 ohms, both at 1% total harmonic distortion. The suggested retail price is €499 or £449 including VAT.
The S3 L uses a dual-mono layout that amplifies the left and right channels independently. Pro-Ject specified channel separation below −82 dB at 10 kHz. At 1 kHz, the signal-to-noise ratio exceeds 97 dB, with an A-weighted figure of 107 dB. Total harmonic distortion plus noise is below 0.005% at 10 W.
A pair of RCA sockets provides the stereo line input, which has a sensitivity of 1.25 V and an impedance of 10 kΩ. The amplifier has 26 dB of gain. Two pairs of isolated speaker terminals accept 4 mm banana plugs, spades, pins or bare wire.
The power switch is on the front panel, and a 2.5 mm coaxial jack provides a 12 V DC trigger input. The amplifier runs from an external 36 V DC supply rated at 5.5 A and draws less than 0.5 W in standby.
Pro-Ject designed and manufactures the S3 L in Europe. Its aluminium enclosure measures 206 mm wide, 55 mm high and 153 mm deep, with the sockets taking the depth to 163 mm. The amplifier weighs 1.1 kg without the power supply and comes in black or silver.
Key specifications
Amplifier layout | Dual mono |
|---|---|
Rated stereo output | 2 × 80 W into 8 Ω; 2 × 140 W into 4 Ω (1% THD) |
Frequency response | 0.1 dB at 20 Hz; +0.3 dB at 20 kHz |
Channel separation | < −82 dB at 10 kHz |
Signal-to-noise ratio | > 97 dB at 1 kHz; 107 dB A-weighted |
THD+N | < 0.005% at 10 W |
Gain | 26 dB |
Line input | 1 stereo RCA pair |
Input sensitivity | 1.25 V |
Input impedance | 10 kΩ |
Speaker outputs | 2 pairs of isolated terminals; 4 mm bananas, spades, pins or bare wire |
Trigger input | 12 V DC via 2.5 mm coaxial jack |
Sources
Data Source