Home Assistant
Connect AUX-2
Home Assistant Connect AUX-2 adds streaming to existing hi-fi
Nabu Casa’s new adapter connects amplifiers, receivers and active loudspeakers to Music Assistant for multiroom playback. Its serial ports also let Home Assistant control compatible AV equipment.
Georg S. Kuklick
•

Nabu Casa launched the Home Assistant Connect AUX-2 worldwide on 11 November 2026. The network audio and control adapter has a single 3.5 mm jack that provides either analogue or optical S/PDIF output. Its recommended price is US$69 in the US and €59 in Europe.
The AUX-2 detects the cable type and selects the output mode automatically. A Texas Instruments PCM5122 DAC handles analogue playback, while the optical connection supports lossless CD-quality playback through an external DAC. Music Assistant combines locally stored music and supported streaming services in one library. Through Music Assistant, the Sendspin protocol synchronises the connected hi-fi system with other compatible players, including Sonos speakers and Apple HomePod devices.
Two 3.5 mm RS-232 ports connect the adapter to equipment such as AV receivers, televisions and projectors. For equipment that supports serial control and has a suitable Home Assistant integration, automations can switch power, select an input or adjust the volume. Switches on the underside of the adapter reverse the transmit and receive connections.
The AUX-2 connects to a home network over Ethernet or 2.4 GHz Wi-Fi and accepts power over Ethernet or USB-C. Bluetooth 5 Low Energy connects smart-home devices rather than carrying audio. The adapter runs ESPHome firmware, requires Home Assistant 2026.9 or later and is unlocked for alternative firmware.
The design began as a way to place a radio adapter where it had better coverage rather than connecting it directly to the Home Assistant system by USB. The USB-A port supports an external Z-Wave adapter, while support for selected Zigbee adapters is experimental.
Key specifications
Audio output | 3.5 mm combination analogue / optical S/PDIF jack |
|---|---|
Output selection | Automatic analogue or digital cable detection |
DAC | Texas Instruments PCM5122 |
Optical playback | Lossless CD-quality audio |
Music library | Music Assistant: supported streaming services and local files |
Multiroom protocol | Sendspin synchronised playback |
Network | Ethernet or 2.4 GHz Wi-Fi |
Power input | USB-C or Power over Ethernet |
Serial control | 2 × 3.5 mm RS-232 ports with switchable RX/TX |
Modbus connectivity | Via external USB RS-485 adapter |
Radio adapter port | USB-A for an external Z-Wave adapter; experimental support for selected Zigbee adapters |
Bluetooth | Bluetooth 5 Low Energy for smart-home devices only |
Sources
Data Source