Vinylspot
IsoHertz
Vinylspot to debut IsoHertz isolators at Warsaw audio show
Vinylspot’s new vibration-isolator range includes IsoHertz V for loudspeakers and audio components and IsoHertz T for turntables. The designs use configurations selected for defined equipment mass ranges, with both ranges scheduled for demonstration at Audio Video Show Warsaw.
Georg S. Kuklick
•

Vinylspot will give its IsoHertz vibration isolators their public premiere at Audio Video Show Warsaw, running from 23 to 25 October 2026. The Vinylspot IsoHertz V and IsoHertz T ranges are supplied in sets of four, priced at PLN 100–350 depending on the model.
IsoHertz V comprises seven models for loudspeakers and audio components weighing between 3 kg and 60 kg. The range is designed to provide isolation starting at 20 Hz for heavier loudspeakers and approximately 25–30 Hz for lighter models. The V7 model uses a 50 mm double elastic layer for heavier equipment.
IsoHertz T comprises three models for turntables weighing between 5 kg and 24 kg, with isolation designed to start between 18 Hz and 25 Hz depending on turntable mass. Its construction combines a 25 mm elastic layer for low-frequency isolation with a 12.5 mm damping layer intended to absorb impacts and shocks. Each T set also includes black HIPS levelling plates for turntables with an off-centre centre of gravity.
Configurations are selected using vibroacoustic calculations for defined equipment mass ranges. The new range continues the Warsaw-based vinyl and analogue specialist’s patented 10Hertz turntable-platform project. That platform is offered for turntables weighing more than 24 kg and is designed to isolate from 10 Hz.
Vinylspot will demonstrate both IsoHertz ranges at the Radisson Blu Sobieski Hotel during the show. The isolators will be available from Vinylspot and at the event, where purchases will qualify for special show discounts.
Key specifications
IsoHertz V application | Loudspeakers and audio components |
|---|---|
IsoHertz V model count | 7 |
IsoHertz V supported equipment mass | 3–60 kg across the range |
IsoHertz V isolation design threshold | 20 Hz for heavier loudspeakers; approximately 25–30 Hz for lighter models |
IsoHertz V7 elastic layer | 50 mm double elastic layer |
IsoHertz T application | Turntables |
IsoHertz T model count | 3 |
IsoHertz T supported turntable mass | 5–24 kg across the range |
IsoHertz T elastic layer | 25 mm, intended for low-frequency isolation |
IsoHertz T damping layer | 12.5 mm, intended to absorb impacts and shocks |
IsoHertz T isolation design threshold | 18–25 Hz depending on turntable mass |
IsoHertz T included accessories | Black HIPS levelling plates |
Sources
Data Source