PSI Audio
AVAA C225
PSI Audio introduces AVAA C225 bass trap for high-SPL rooms
The AVAA C225 adds a higher-power model to PSI Audio’s active bass trap range. It uses two 10-inch drivers to absorb low-frequency energy in the room, independently of the audio signal chain.
Georg S. Kuklick
•

PSI Audio introduced an active bass trap for home cinemas, small clubs and studios in Yverdon-les-Bains on 8 September 2026. The AVAA C225 absorbs bass from 12 to 130 Hz and operates at sound pressure levels up to 135 dB SPL.
A built-in sensor continuously measures low-frequency acoustic pressure around the unit. In response, a control circuit uses a 300 W amplifier to drive two 10-inch membranes that absorb acoustic energy in the room. The system works independently of the audio signal chain and across its absorption band without tuning to individual frequencies.
In PSI Audio’s measurements, the C225’s equivalent absorption area approaches 8 m² at around 30 Hz. Its nominal absorption is comparable to that of a porous absorber roughly 40 times its size. Absorption in an installed system depends on room acoustics and placement. The recommended position is where bass pressure builds up, typically against a solid wall or in a corner.
PSI Audio manufactures the C225 in Switzerland and calibrates each unit in its anechoic chamber. The unit has a black finish, measures 780 × 570 × 570 mm and weighs 33 kg. The AVAA Controller smartphone app can control units individually or as a group.
PSI Audio first used its Active Velocity Acoustic Absorber technology in the AVAA C20 in 2016. The company later developed the smaller, digitally controlled AVAA C214, designed primarily for critical listening rooms. The C225 joins it as the higher-power option in the range.
Key specifications
Drivers | 2 × 10-inch |
|---|---|
Amplifier power | 300 W |
Maximum operating SPL | 135 dB SPL |
Absorption frequency range | 12–130 Hz |
Equivalent absorption area | Approaches 8 m² at around 30 Hz in manufacturer measurements |
Passive treatment comparison | Comparable to a porous absorber approximately 40 times the unit’s size (manufacturer claim) |
Sensing | Built-in acoustic pressure sensor |
Tuning | No frequency-specific tuning required |
Audio system connection | Standalone operation |
Control | AVAA Controller for iOS and Android; individual or grouped units |
Dimensions | 780 × 570 × 570 mm |
Weight | 33 kg |
Sources
Data Source