Phil Ward
LS3/5X
Phil Ward introduces the LS3/5X, a new take on the BBC LS3/5A
Ward’s LS3/5X standmount retains the proportions and thin-wall cabinet construction of the BBC mini-monitor. The project grew out of a conversation with Andy Whittle of Rogers Hi-Fi about how contemporary drivers might perform in that format.
Georg S. Kuklick
•

British loudspeaker designer Phil Ward is taking direct orders for the LS3/5X, his reinterpretation of the BBC LS3/5A. The sealed two-way standmount pairs a 130 mm Purifi USHINDI bass/midrange driver with an aluminium-ceramic dome tweeter. The price is £4,999 per pair.
The LS3/5X is built by hand in small numbers. Orders require a £1,500 deposit, and the estimated minimum manufacturing lead time is three months. International shipping, duties and taxes are extra.
The bass/midrange driver has an aluminium diaphragm, uses Purifi’s Neutral Surround and offers ±9.8 mm of linear excursion. Its motor is designed to maintain consistent performance as the voice coil moves. The tweeter sits in a curved waveguide that controls dispersion, and the electrical crossover uses symmetrical third-order filters at 1.4 kHz.
The specified on-axis frequency response is 75 Hz to 20 kHz within ±1.5 dB, with bass extension to 46 Hz at −6 dB. Sensitivity is 81 dB at one metre with a 2.83 V input, and nominal impedance is 8 Ω. The recommended amplifier power is above 25 W per channel.
The cabinet uses thin birch plywood with hardwood reinforcement at the corners and bitumen damping inside. The front panel is 15 mm Permali, while the separate waveguide panel is made of HIMACS mineral composite. Each speaker measures 310 × 194 × 174 mm and weighs 7.1 kg. Veneer options are rosewood, walnut, oak and olive.
Key specifications
System | Sealed two-way standmount |
|---|---|
Bass/midrange driver | 130 mm Purifi USHINDI with aluminium diaphragm and Neutral Surround |
Bass/midrange linear excursion | ±9.8 mm |
Tweeter | Aluminium-ceramic dome in a curved waveguide |
Crossover | 1.4 kHz; symmetrical third-order electrical filters |
Cabinet construction | Thin birch plywood with hardwood corner reinforcement and internal bitumen damping |
Front panel | 15 mm Permali |
Waveguide panel | HIMACS mineral composite |
On-axis frequency response | 75 Hz–20 kHz (±1.5 dB) |
Bass extension | 46 Hz at −6 dB |
Sensitivity | 81 dB at 2.83 V at 1 m |
Nominal impedance | 8 Ω |
Data Source