Eversolo

C10 High-Precision Master Clock

Eversolo opens pre-orders for its C10 High-Precision Master Clock

Eversolo has detailed the C10 master clock following its appearance alongside the T10 Reference Streaming Transport at HIGH END Vienna 2026. The clock completes the company’s three-component flagship digital source system, with the T10 serving as the transport and the DAC-Z10 as the converter.

Georg S. Kuklick

•

Eversolo has opened pre-orders for its C10 master clock at A$2,999, US$1,880 and €1,890. The C10 High-Precision Master Clock uses a 10 MHz reference to provide external timing for compatible streamers, CD transports and DACs.

The C10 distributes its clock signal through four independently buffered BNC outputs. Its nine selectable frequencies include 10, 25 and 100 MHz as well as frequencies in the 44.1 kHz and 48 kHz sampling families. The receiving component’s external clock input must match both the selected frequency and the electrical specifications of the output.

A custom oven-controlled oscillator generates the reference signal using an SC-cut quartz crystal. The crystal’s double-rotated geometry is designed to reduce its sensitivity to temperature changes and mechanical stress. The timing circuit combines precision temperature regulation, a low-noise phase-locked loop and Eversolo’s Reference Timing Engine to minimise timing variation.

The factory-calibrated reference has a specified accuracy of ±0.01 ppm at 25 °C, with frequency stability better than 0.003 ppm from −20 °C to +60 °C. Specified phase noise is −115 dBc/Hz or lower at a 1 Hz offset and −145 dBc/Hz or lower at a 1 kHz offset. The specified noise floor is −170 dBc/Hz or lower.

An 8.8-inch IPS touchscreen plots the oscillator’s temperature in real time as it approaches its calibrated operating temperature. The display identifies three stages: Warm-up, Stabilising and Stable. An SMB input accepts an external one-pulse-per-second signal derived from a satellite navigation system for timebase calibration, and the screen shows the calibration status.

Key specifications

Reference oscillator

Custom 10 MHz SC-cut OCXO

Timing control

Low-noise PLL with Eversolo Reference Timing Engine

Phase noise

≤ −115 dBc/Hz at 1 Hz offset; ≤ −145 dBc/Hz at 1 kHz offset

Noise floor

≤ −170 dBc/Hz

Frequency accuracy

±0.01 ppm at 25 °C for the factory-calibrated 10 MHz reference

Temperature stability

Better than 0.003 ppm from −20 °C to +60 °C

Clock outputs

4 × BNC, independently buffered

Output frequencies

Nine selectable; include 10, 25 and 100 MHz and frequencies in the 44.1 kHz and 48 kHz sampling families

External reference input

SMB for a GNSS-derived 1PPS reference

Display

8.8-inch IPS touchscreen

Transformer

Toroidal

Chassis material

Aluminium

Data Source

Never miss an update!

Subscribe for platform news and what lands next.

By clicking Subscribe Now you're confirming that you agree with our Terms & Conditions.

Built by humans with the help of AI in Berlin, New York, and Vienna.

© 2026 Neo Digital Magazines llc. All rights reserved.

Never miss an update!

Subscribe for platform news and what lands next.

By clicking Subscribe Now you're confirming that you agree with our Terms & Conditions.

Built by humans with the help of AI in Berlin, New York, and Vienna.

© 2026 Neo Digital Magazines llc. All rights reserved.

Never miss an update!

Subscribe for platform news and what lands next.

By clicking Subscribe Now you're confirming that you agree with our Terms & Conditions.

Built by humans with the help of AI in Berlin, New York, and Vienna.

© 2026 Neo Digital Magazines llc. All rights reserved.