Linear Tube Audio

Century Preamplifier

Linear Tube Audio introduces fully balanced Century Preamplifier

Linear Tube Audio introduced the Century Preamplifier as a partner for its Century Monoblocks. The two form a fully balanced system. The preamplifier draws on the balanced circuitry of the Aero+ DAC and the direct-coupled design of the David Berning Company Pre One.

Georg S. Kuklick

•

Linear Tube Audio introduced the Century Preamplifier at Capital Audiofest, held in Rockville, Maryland, from 13 to 15 November 2026. It is the company’s first fully balanced design to use David Berning’s Zero-Hysteresis Output Transformerless (ZOTL) technology.

Both channels operate in Class A without negative feedback. Direct coupling eliminates the need for coupling capacitors throughout the signal path, including at the output. Each channel uses one 12AT7 tube and two 6J5/12J5 single triodes in a parallel single-ended configuration. An automatic bias circuit continuously adjusts the tubes’ operating conditions, and their estimated service life under normal use is 10,000 hours.

The Century has three balanced XLR inputs and three single-ended RCA inputs, each with independent settings. Volume adjustment uses a separate remotely controlled resistor-ladder attenuator for each channel. The preamplifier also supports Home Theater Mode and has two 12 V trigger outputs.

Two balanced XLR outputs and two single-ended RCA outputs provide connections to power amplifiers. Gain is adjustable, with output gain specified at 18 dB on XLR and 12 dB on RCA. Maximum output is 14 Vrms on XLR and 7 Vrms on RCA. The specified frequency response is 2 Hz to 35 kHz within ±1 dB, and the A-weighted signal-to-noise ratio is 105 dB.

The audio board carries surface-mount components on a low-loss ceramic substrate, with internal and external Faraday shielding around the signal circuitry. Both the chassis and the signal-carrying components use non-magnetic materials. The preamplifier weighs 8.4 kg and comes in brushed silver or black.

Key specifications

Topology

Fully balanced ZOTL; direct-coupled; capacitor-less output; Class A

Negative feedback

Zero

Tube complement per channel

1 × 12AT7; 2 × 6J5/12J5 single triodes; parallel single-ended configuration

Estimated tube life

Approximately 10,000 hours under normal operating conditions

Biasing

Automatic, with continuous monitoring and adjustment

Volume control

2 remote-controlled resistor-ladder attenuators, 1 per channel; 100–199 steps

Circuit board

Low-loss ceramic substrate; surface-mount components

Construction

Non-magnetic chassis and signal-carrying components

Shielding

Internal and external Faraday shielding

Gain

XLR: 18 dB; RCA: 12 dB

Input impedance

XLR: 100 kΩ; RCA: 50 kΩ

Output impedance

XLR: 150 Ω; RCA: 75 Ω

  • Rung below: MicroZOTL Preamplifier Level 3 — from $5,950.00

Data Source

Never miss an update!

Subscribe for platform news and what lands next.

By clicking Subscribe Now you're confirming that you agree with our Terms & Conditions.

Built by humans with the help of AI in Berlin, New York, and Vienna.

© 2026 Neo Digital Magazines llc. All rights reserved.

Never miss an update!

Subscribe for platform news and what lands next.

By clicking Subscribe Now you're confirming that you agree with our Terms & Conditions.

Built by humans with the help of AI in Berlin, New York, and Vienna.

© 2026 Neo Digital Magazines llc. All rights reserved.

Never miss an update!

Subscribe for platform news and what lands next.

By clicking Subscribe Now you're confirming that you agree with our Terms & Conditions.

Built by humans with the help of AI in Berlin, New York, and Vienna.

© 2026 Neo Digital Magazines llc. All rights reserved.