iBasso
DC-Tonfa
iBasso launches DC-Tonfa USB DAC with switchable S/PDIF output
The iBasso DC-Tonfa is on sale as a headphone amplifier that can also feed an external DAC. Japanese headphone specialist e-earphone contributed to its design, accessories and sound tuning.
Georg S. Kuklick
•

iBasso has combined a headphone amplifier and an S/PDIF digital output in a 61 mm USB dongle. The iBasso DC-Tonfa is now on sale and uses a fully balanced, differential 24-bit R2R DAC.
The 3.5 mm socket doubles as a single-ended headphone output and a digital connection to an external DAC. Selecting S/PDIF on the dongle or in iBasso’s Android app switches the socket to PCM output at up to 768 kHz. For headphones, the 3.5 mm output is rated at 219 mW per channel into 32 ohms, while the 4.4 mm balanced output is rated at up to 800 mW per channel into the same load. Both have high and low gain settings.
The converter uses 312 precision metal-film resistors, 60 of which form a dedicated compensation network. An FPGA runs iBasso’s algorithms to correct for variations in resistor values in real time. The amplifier stage pairs two Texas Instruments dual op-amps with four BUF634A buffers.
Over USB, the DC-Tonfa accepts PCM at up to 768 kHz and native DSD512. USB Audio Class 2.0 mode supports iOS, Android, Windows, macOS and Linux. Switching to USB Audio Class 1.0 lets the dongle serve as an external DAC and headphone amplifier for Nintendo Switch 2 and PlayStation 5.
Playback options include a non-oversampling mode and four iBasso digital filters. During 48 kHz playback in non-oversampling mode, the dongle draws less than 100 mA from a 5 V supply. The iBasso UAC app for Android provides controls for filter selection, gain and channel balance. On Windows and macOS, the control panel runs in a browser.
Key specifications
DAC architecture | 24-bit fully balanced differential R2R |
|---|---|
Resistor network | 312 precision metal-film resistors, including 60 compensation resistors |
Resistor correction | Real-time FPGA correction using iBasso algorithms |
Amplifier stage | 2 Texas Instruments dual op-amps; 4 BUF634A buffers |
Playback modes | Non-oversampling or 4 iBasso digital filters |
Current draw | Less than 100 mA at 5 V during 48 kHz non-oversampling playback |
Balanced headphone output | 4.4 mm; up to 800 mW per channel into 32 ohms |
Single-ended headphone output | 3.5 mm; 219 mW per channel into 32 ohms |
Dynamic range | 123 dB balanced; 115 dB single-ended |
Gain settings | High or low on either headphone output |
High-gain output voltage | 5.2 V RMS balanced; 2.6 V RMS single-ended |
Digital output | Switchable S/PDIF via 3.5 mm socket; PCM up to 768 kHz |
Sources
Data Source